CKS-M2.5-2
PEM® CASTSERT® Press-in Inserts
CKS-M2.5-2
PEM® CASTSERT® Press-in Inserts
For Castings and Soft Metals HRB 70 / HB 125 or less PEM® 300 Series Stainless Steel CASTSERT® inserts provide strong, durable metal threads in soft metals and die-cast alloys. The simple press-in and rapid installation process for these inserts uses a flat punch and anvil to install all sizes and lengths, approximately 80% faster than other methods.
- Designed for flush installation with flat punch and anvil into blind holes or thru-holes
- Process cost savings vs. coil inserts or thread tapping
- Installed into drilled holes or as-cast holes with low draft angle
- Pilot for rapid seating and self-alignment
- Symmetric for auto-feed capability
Fastener drawings and models are available at devaws.pemnet.com
Especificaciones
- Código de rosca
- M2.5
- Tamaño de rosca
- M2.5 x 0.45
- Especificación de rosca
- 6H, ASME B1.13M
- Material del inserto
- 300 Series Stainless Steel
- Acabado Estandard
- Passivated and/or tested per ASTM A380
- Para uso en láminas de dureza
- For Use in Castings and Soft Metals HRB 70 / HB 125 or Less
- Categoría del producto
- PEM® CASTSERT® Press-in Inserts – Metric
- Tipo de rosca
- Internal
- After Knurl E Nom_mm
- 4.98mm
- Length A ± 0.13_mm
- 6.35mm
- Min. Sheet Thickness R_mm
- 6.48mm
- Min Dia H of Tapered Hole at Length R (mm)
- 4.57
- Producto de la familia PEM
- CKS
- Pilot C Max._mm
- 4.55mm
- Tipo de producto
- Insertos
- Dist. Mín orificio cercano al borde_mm
- 3.83mm
Datos de instalación y rendimiento
| Type | Thread Code | Test Sheet Material | Anvil Dim A (mm) | Anvil Dim B (mm) | Anvil Dim C (mm) | Haeger Part Number Anvil | Haeger Part Number Punch | Installation (kN) | Length Code | Pullout (N) |
|---|---|---|---|---|---|---|---|---|---|---|
| CKS | M2.5 | ADC12 Die Cast Aluminum (A383 Equivalent) | 76.2 | 63.5 | 25.4 | H-108-0020L | H-108-0020L | 6.3 | 2 | 600 |
Inventario
| Distribuidor | Cantidad | Contacto | Teléfono | Dirección | Ubicaciones |
|---|