HFLH-M8-40X

Type HFLH™ Hard Panel Studs

HFLH-M8-40X

Type HFLH™ Hard Panel Studs

Installs into thinner, harder, high strength steel materials (high strength steel sheets up to 700 MPa maximum ultimate tensile)
Allows overall weight reduction for all vehicles
Provides lower installed cost

Compare to other thin sheet fastening devices:– Addresses environmental concerns

Lighter weight
Close to edge of panel mounting
No embossing required
Hardened stud material provides stronger thread strength
Can be installed automatically using press or in-die technology

Request Samples

Código de rosca: M8
Tamaño de rosca: M8 x 1.25
Especificación de rosca: 6g, ASME B1.13M
Material del inserto: Hardened Medium Carbon Alloy Steel
Acabado Estandard: No Finish (with Rust Preventative Oil)
Para uso en láminas de dureza: HRB 96 / HB 216 or Less
Categoría del producto: Type HFLH™ Hard Panel Studs – Metric
Tipo de rosca: External
Producto de la familia PEM: HFLH
Tipo de producto: Pernos

H Más Menos 025 Mm: 15.3mm
Hole Size in Sheet + 0.13_mm: 8mm
L ± 0.4_mm: 40mm
Dist. Mín orificio cercano al borde_mm: 14.5mm
S Max._mm: 3.3mm
T Max._mm: 2.13mm

Type	Thread Code	Anvil Dim A + 0.1 (mm)	Anvil Dim C + 0.08 (mm)	Haeger Anvil For Sheet 1.5 to 1.9 (mm)	Haeger Anvil For Sheet > 1.9 (mm)	Haeger Punch	Installation (kN)	Pemserter Anvil For Sheet 1.5 to 1.9 (mm)	Pemserter Anvil For Sheet > 1.9 (mm)	Pemserter Punch	PULL THRU (kN)	Pushout (N)	REC. NUT TIGHTENING TORQUE (N•m)	SHEET HARDNESS HRB	TENSILE STRENGTH (kN)	TEST BUSHING HOLE SIZE FOR PULL THRU TESTS	TEST SHEET THICKNESS & MATERIAL	Torque-out (N•m)
HFLH	M8	8.6	8.03	H-103-M8LC	H-103-M8L	H-108-0020L	71.1	8003706	970200231300	8003712	27.5	2400	26	91	32.9	10.3	1.5 mm HC500LA	33.9

Distribuidor	Cantidad	Contacto	Teléfono	Dirección	Ubicaciones