SH-M8-2X
Type SH™ Hard Panel Nuts
SH-M8-2X
Type SH™ Hard Panel Nuts
- Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile)
- Allows overall weight reduction for all vehicles
- Provides lower installed cost
- Unplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020”/.0051 mm
Compare to other thin sheet fastening devices:– Addresses environmental concerns
- Smaller outer diameter
- Lighter weight
- Flush on reverse side of panel
- Close to edge of panel mounting
- No embossing required
- Hardened nut material provides stronger thread strength
- Can be installed automatically using press or in-die technology
Especificaciones
- Código de rosca
- M8
- Tamaño de rosca
- M8 x 1.25
- Especificación de rosca
- 6H, ASME B1.13M
- Código del vástago
- 2
- Material del inserto
- Hardened Alloy Steel
- Acabado Estandard
- No Finish (with Rust Preventative Oil)
- Para uso en láminas de dureza
- HRC 30 / HB 277 or Less
- Categoría del producto
- Type SH™ Hard Panel Nuts – Metric
- Tipo de rosca
- Internal
- Marca
- PEM
- Hole Size in Sheet +.003 / +0.08mm_mm
- 10.5mm
- Producto de la familia PEM
- SH
- Tipo de producto
- Tuercas
- A Vástago máx
- 2.21mm
- E ± 0.25_mm
- 12.7mm
- Tamaño del orificio en la lámina + 0.08_mm
- 10.5mm
- Dist. Mín orificio cercano al borde_mm
- 9.7mm
- C Máx._mm
- 10.47mm
- T ± 0.25_mm
- 5.47mm
Inventario
| Distribuidor | Cantidad | Contacto | Teléfono | Dirección | Ubicaciones |
|---|