HFLH-032-8X
Type HFLH™ Hard Panel Studs
HFLH-032-8X
Type HFLH™ Hard Panel Studs
- Installs into thinner, harder, high strength steel materials (high strength steel sheets up to 700 MPa maximum ultimate tensile)
- Allows overall weight reduction for all vehicles
- Provides lower installed cost
Compare to other thin sheet fastening devices:– Addresses environmental concerns
- Lighter weight
- Close to edge of panel mounting
- No embossing required
- Hardened stud material provides stronger thread strength
- Can be installed automatically using press or in-die technology
仕様
- Thread Code.jp
- 032
- ねじ径
- .190-32 (#10-32)
- ねじの仕様
- 2A, ASME B1.1
- ファスナー材質
- Hardened Medium Carbon Alloy Steel
- 表面処理
- No Finish (with Rust Preventative Oil)
- For Use in Sheet Hardness
- HRB 96 / HB 216 or Less
- Product Category
- Type HFLH™ Hard Panel Studs – Unified
- Thread Type
- External
- PEM®製品
- HFLH
- 製品
- スタッド
- H ± .01_in
- 0.357in
- Hole Size in Sheet +.005 – .000_in
- 0.19in
- Hole Size in Sheet + 0.13_mm
- mm
- L Len Pm 015in Or 4mm
- 0.5in
- L ± 0.4_mm
- mm
- Min. Dist. Hole C/L to Edge_in
- 0.36in
- S Max._in
- 0.102in
- T Max._in
- 0.048in
データシート
| Type | Thread Code | Installation (lbs.) | Anvil Dim A (in.) | Anvil Dim C (in.) | Haeger Anvil For Sheet .040 to .060 (in.) | Haeger Anvil For Sheet > .060 (in.) | Haeger Punch | Pemserter Anvil For Sheet .040 to .060 (in.) | Pemserter Anvil For Sheet > .060 (in.) | Pemserter Punch | PULL THRU (lbs.) | Pushout (lbs.) | REC. NUT TIGHTENING TORQUE (ft. lbs.) | SHEET HARDNESS HRB | TENSILE STRENGTH (lbs.) | TEST BUSHING HOLE SIZE FOR PULL THRU TESTS | TEST SHEET THICKNESS & MATERIAL | Torque-out (in. lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HFLH | 32 | 9500 | .216 – .220 | .191 – .194 | H-103-10LC | H-103-10L | H-108-0020L | 970200246300 | 970200009300 | 8003707 | 2200 | 300 | 4.2 | 89 | 2400 | 0.279 | .040″ HC500LA | 60 |
在庫
| 販売業者 | 在庫 | お問い合わせ | 電話番号 | 住所 | ロケーション |
|---|