HFLH-M8-40X
Type HFLH™ Hard Panel Studs
HFLH-M8-40X
Type HFLH™ Hard Panel Studs
- Installs into thinner, harder, high strength steel materials (high strength steel sheets up to 700 MPa maximum ultimate tensile)
- Allows overall weight reduction for all vehicles
- Provides lower installed cost
Compare to other thin sheet fastening devices:– Addresses environmental concerns
- Lighter weight
- Close to edge of panel mounting
- No embossing required
- Hardened stud material provides stronger thread strength
- Can be installed automatically using press or in-die technology
仕様
- Thread Code.jp
- M8
- ねじ径
- M8 x 1.25
- ねじの仕様
- 6g, ASME B1.13M
- ファスナー材質
- Hardened Medium Carbon Alloy Steel
- 表面処理
- No Finish (with Rust Preventative Oil)
- For Use in Sheet Hardness
- HRB 96 / HB 216 or Less
- Product Category
- Type HFLH™ Hard Panel Studs – Metric
- Thread Type
- External
- PEM®製品
- HFLH
- 製品
- スタッド
- H Plus Minus 025 Mm
- 15.3mm
- Hole Size in Sheet + 0.13_mm
- 8mm
- L ± 0.4_mm
- 40mm
- Min. Dist. Hole C/L to Edge_mm
- 14.5mm
- S Max._mm
- 3.3mm
- T Max._mm
- 2.13mm
データシート
| Type | Thread Code | Anvil Dim A + 0.1 (mm) | Anvil Dim C + 0.08 (mm) | Haeger Anvil For Sheet 1.5 to 1.9 (mm) | Haeger Anvil For Sheet > 1.9 (mm) | Haeger Punch | Installation (kN) | Pemserter Anvil For Sheet 1.5 to 1.9 (mm) | Pemserter Anvil For Sheet > 1.9 (mm) | Pemserter Punch | PULL THRU (kN) | Pushout (N) | REC. NUT TIGHTENING TORQUE (N•m) | SHEET HARDNESS HRB | TENSILE STRENGTH (kN) | TEST BUSHING HOLE SIZE FOR PULL THRU TESTS | TEST SHEET THICKNESS & MATERIAL | Torque-out (N•m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HFLH | M8 | 8.6 | 8.03 | H-103-M8LC | H-103-M8L | H-108-0020L | 71.1 | 8003706 | 970200231300 | 8003712 | 27.5 | 2400 | 26 | 91 | 32.9 | 10.3 | 1.5 mm HC500LA | 33.9 |
在庫
| 販売業者 | 在庫 | お問い合わせ | 電話番号 | 住所 | ロケーション |
|---|