LA4-632-1MD
Floating self-clinching, locking thread fasteners LA4, LAC, LAS
LA4-632-1MD
Floating self-clinching, locking thread fasteners LA4, LAC, LAS
Locking and Non-locking Threads These fasteners provide load-bearing threads in thin sheets and permit up to .030” adjustment for mating hole misalignment.
The self-clinching feature offers fast and simple assembly. The fasteners are squeezed into prepared holes using any standard press. The sheet remains flush on one side, and the fastener is permanently locked in place.
Extra strength and support in assembly is obtained by the threads of the floating nut extending fully into the retainer shank (a unique PEM feature). A self-locking version of the fastener is also offered. Thread locking torque performance is equivalent to applicable NASM25027 specifications.
Non-locking Type A4 and self-locking Type LA4 fasteners provide load-bearing threads in stainless steel sheets as thin as .038” with hardness up to HRB 88 on the Rockwell “B” scale.
Many PEM Type AS and AC self-clinching floating fasteners correspond to sizes in US NASM45938/11 specifications. Check our web site for a complete Military Specification and National Aerospace Standards Reference Guide (Bulletin NASM).
仕様
- Thread Code.jp
- 632
- Thread Size(x Pitch)
- .138-32 (#6-32)
- Shank Code
- 1
- Standard Finish – Retainer & Nut
- Passivated and/or Tested Per ASTM A380;Black Dry-film Lubricant
- For Use in Sheet Hardness
- HRB 88 / HB 183 or Less
- Float
- .015” minimum, in all directions from center, .030” total
- Product Category
- Floating self-clinching, locking thread fasteners LA4, LAC, LAS – Unified
- ブランド
- PEM
- Locking Performance Cycles
- 15
- PEM®製品
- LA4
- 製品
- OtherFasteners
- A Shank Max
- 0.038in
- E ± .015_in
- 0.39in
- Hole Size in Sheet +.003 – .000_in
- in
- Min. Dist. Hole C/L to Edge_in
- 0.32in
- C Max._in
- 0.327in
- D Max._in
- 0.335in
- T2 Max._in
- 0.2in
データシート
| Type | Thread Code | Test Sheet Material | Installation (lbs.) | Retainer Pushout (lbs.) | Retainer Torque-out (in. lbs.) | A ±.001 (in.) | A ±0.03 (mm) | B ±.005 (in.) | B ±0.13 (mm) | Haeger Part Number Anvil | Haeger Part Number Punch | Pemserter Part Number Anvil | Pemserter Part Number Punch | Locknut Min. Axial Strength (lbs.) | Mating Screw Strength Level (ksi) | Mating Screw Tightening Torque (in. lbs.) | Counterbore A ±.001 (in.) | Counterbore A ±0.03 (mm) | Hole Depth Below Counterbore B ±.005 (in.) | Hole Depth Below Counterbore B ±0.13 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A4-LA4 | 632 | 300 Series Stainless Steel | 10000 | 200 | 85 | 0.054 | 1.37 | 0.315 | 8 | H-131-6L | H-108-0020L | 8013890 | 975200048 | |||||||
| LAC, LAS, LA4 | 632 | 1636 | 180 | 29.4 | ||||||||||||||||
| LA4 | 632 | 300 Series Stainless Steel | 10000 | 200 | 85 | H-131-6L | H-108-0020L | 8013890 | 975200048 | 0.054 | 1.37 | 0.315 | 8 |
在庫
| 販売業者 | 在庫 | お問い合わせ | 電話番号 | 住所 | ロケーション |
|---|