HFLH-032-12ZI

Type HFLH™ Hard Panel Studs

HFLH-032-12ZI

Type HFLH™ Hard Panel Studs

Installs into thinner, harder, high strength steel materials (high strength steel sheets up to 700 MPa maximum ultimate tensile)
Allows overall weight reduction for all vehicles
Provides lower installed cost

Compare to other thin sheet fastening devices:– Addresses environmental concerns

Lighter weight
Close to edge of panel mounting
No embossing required
Hardened stud material provides stronger thread strength
Can be installed automatically using press or in-die technology

Request Samples

Thread Code: 032
Thread Size: .190-32 (#10-32)
Thread Specification: 2A, ASME B1.1
Fastener Material: Hardened Medium Carbon Alloy Steel
Standard Finish: Colorless, SC1 (5µm), Type III, Zinc plated per ASTM B633
For Use in Sheet Hardness: HRB 96 / HB 216 or Less
Product Category: Type HFLH™ Hard Panel Studs – Unified
Thread Type: External
Brand: PEM
PEM Product Family: HFLH
Product Type: Studs

H ± .01_in: 0.357in
Hole Size in Sheet +.005 – .000_in: 0.19in
Hole Size in Sheet + 0.13_mm: mm
L Len Pm 015in Or 4mm: 0.75in
L ± 0.4_mm: mm
Min. Dist. Hole C/L to Edge_in: 0.36in
S Max._in: 0.102in
T Max._in: 0.048in

Type	Thread Code	Installation (lbs.)	Anvil Dim A (in.)	Anvil Dim C (in.)	Haeger Anvil For Sheet .040 to .060 (in.)	Haeger Anvil For Sheet > .060 (in.)	Haeger Punch	Pemserter Anvil For Sheet .040 to .060 (in.)	Pemserter Anvil For Sheet > .060 (in.)	Pemserter Punch	PULL THRU (lbs.)	Pushout (lbs.)	REC. NUT TIGHTENING TORQUE (ft. lbs.)	SHEET HARDNESS HRB	TENSILE STRENGTH (lbs.)	TEST BUSHING HOLE SIZE FOR PULL THRU TESTS	TEST SHEET THICKNESS & MATERIAL	Torque-out (in. lbs.)
HFLH	32	9500	.216 – .220	.191 – .194	H-103-10LC	H-103-10L	H-108-0020L	970200246300	970200009300	8003707	2200	300	4.2	89	2400	0.279	.040″ HC500LA	60

Distributor	Quantity	Contact	Phone	Address	Locations