HFLH-M5-50X
Type HFLH™ Hard Panel Studs
HFLH-M5-50X
Type HFLH™ Hard Panel Studs
- Installs into thinner, harder, high strength steel materials (high strength steel sheets up to 700 MPa maximum ultimate tensile)
- Allows overall weight reduction for all vehicles
- Provides lower installed cost
Compare to other thin sheet fastening devices:– Addresses environmental concerns
- Lighter weight
- Close to edge of panel mounting
- No embossing required
- Hardened stud material provides stronger thread strength
- Can be installed automatically using press or in-die technology
Specifications
- Thread Code
- M5
- Thread Size
- M5 x 0.8
- Thread Specification
- 6g, ASME B1.13M
- Fastener Material
- Hardened Medium Carbon Alloy Steel
- Standard Finish
- No Finish (with Rust Preventative Oil)
- For Use in Sheet Hardness
- HRB 96 / HB 216 or Less
- Product Category
- Type HFLH™ Hard Panel Studs – Metric
- Thread Type
- External
- PEM Product Family
- HFLH
- Product Type
- Studs
- H Plus Minus 025 Mm
- 9.6mm
- Hole Size in Sheet + 0.13_mm
- 5mm
- L ± 0.4_mm
- 50mm
- Min. Dist. Hole C/L to Edge_mm
- 10mm
- S Max._mm
- 2.6mm
- T Max._mm
- 1.35mm
Installation & Performance Data
| Type | Thread Code | Anvil Dim A + 0.1 (mm) | Anvil Dim C + 0.08 (mm) | Haeger Anvil For Sheet 1 to 1.51 (mm) | Haeger Anvil For Sheet > .1.51 (mm) | Haeger Punch | Installation (kN) | Pemserter Anvil For Sheet 1 to 1.51 (mm) | Pemserter Anvil For Sheet > .1.51 (mm) | Pemserter Punch | PULL THRU (kN) | Pushout (N) | REC. NUT TIGHTENING TORQUE (N•m) | SHEET HARDNESS HRB | TENSILE STRENGTH (kN) | TEST BUSHING HOLE SIZE FOR PULL THRU TESTS | TEST SHEET THICKNESS & MATERIAL | Torque-out (N•m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HFLH | M5 | 5.6 | 5.03 | H-103-M5LC | H-103-M5L | H-108-0020L | 51.1 | 8003704 | 970200020300 | 8003710 | 10.6 | 1350 | 6.4 | 89 | 12.8 | 7.4 | 1 mm HC500LA | 8.1 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|